69 16SC Restoration

[thejum57]

My first post. This will be the restoration of a 1969 16SC Shasta, my wife & I aquired about a year ago.

[cdraz]

Glad you found us, show us pictures, please!

[thejum57]

If you haven't seen them yet, I have a bunch of pics in the section for "your photos". There under Jim & Donna's 69 16SC. But I will be posting lots of pics here as I do stuf. There may be long stretches in between though My next post will have pics

[thejum57]

I haven't done ANYTHING to the trailer this summer but move it to a better spot in the yard & set up the awning. So, Monday of the Labor Day Weekend I decided to clean up the range hood & gas light vents, then replace with new stainless steel screws. "Stainless" Mmmmmm!!! I removed the light's vent
i172.photobucket.com/albums/w13/thejum57/Shasta%20Trailer%20Work/trailerventre-do002.jpg
then cleaned off all the gasket materilal from the vent & the trailer. I wanted to paint it a fresh coat of white, but didn't have the paint, money or the ambition to go to the store.
Here it is re-installed
i172.photobucket.com/albums/w13/thejum57/Shasta%20Trailer%20Work/trailerventre-do009.jpg
Next I removed the range hood vent along with a couple of bee's nests

i172.photobucket.com/albums/w13/thejum57/Shasta%20Trailer%20Work/trailerventre-do008.jpg
That was aluminum, so I broke out the Dremel & it's tiny wire brush, & set to work.
i172.photobucket.com/albums/w13/thejum57/Shasta%20Trailer%20Work/trailerventre-do018.jpg
Here is the vent re-installed
i172.photobucket.com/albums/w13/thejum57/Shasta%20Trailer%20Work/trailerventre-do019.jpg
Here are both
i172.photobucket.com/albums/w13/thejum57/Shasta%20Trailer%20Work/trailerventre-do020.jpg
2
Here is inside i172.photobucket.com/albums/w13/thejum57/Shasta%20Trailer%20Work/trailerventre-do015.jpg
i172.photobucket.com/albums/w13/thejum57/Shasta%20Trailer%20Work/trailerventre-do016.jpg