|
|
Post by brokevet on Feb 27, 2013 13:23:49 GMT -5
Where do you find windows? No, not the $300 Dollar ones.
I have two 15 by 40.5. Three 15 by 24. And one 15 by 18.
The ones I have are crank outs and all parts are broken except glass and aluminum frames. They are permanently closed with sheet metal screws now.
|
|
|
|
Post by pathfinder3081 on Feb 27, 2013 16:08:10 GMT -5
What did they come off of there brother? These things are not to hard to rebuild. You might be able to scrap one or two together. I have some out of a 1400, an early 70 model. There in pretty good shape but can be made to show room with a few hours and couple of bucks.
|
|
|
|
Post by kto17 on Feb 27, 2013 16:37:03 GMT -5
Some parts are available new from Vintage Trailer Supply. If you can't fin used parts on the board there are some places that part out trailers, but they tend to cost more than individuals selling parts.
|
|
|
|
Post by brokevet on Feb 27, 2013 19:06:20 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 27, 2013 19:27:36 GMT -5
You definitely have a job on your hands, and could I make a suggestion....
It's been said that you should not tear out the interior panel and the exterior aluminum all at the same time, as it becomes really difficult to make the "fit" again.
|
|
|
|
Post by brokevet on Feb 27, 2013 19:49:37 GMT -5
I am doing just that corner first. I will leave the ceiling, front, back, and other side together as I work on the 2 by 2 framing.
I have a lot of rot. But I can see where it all comes from. Roof is good. All the leaking is from clearance lights and tail lights. And that side window.
|
|
|
|
Post by brokevet on Feb 27, 2013 19:54:21 GMT -5
My rear window is missing. PO took it out to install a window AC. Leaked all around it too. I will frame it 15 by 24 and hope I can find a window somewhere.
|
|
|
|
Post by brokevet on Feb 27, 2013 20:10:12 GMT -5
South Central Florida.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 27, 2013 21:06:53 GMT -5
|
|
|
|
Post by brokevet on Mar 11, 2013 20:56:10 GMT -5
I need a 15 high by 24 wide window for the back where DPO put a home window AC that destroyed the camper.
|
|
|
|
Post by lopo on Mar 11, 2013 21:33:31 GMT -5
South Central Florida? Highlands Co.? Okeechobee? You might try calling Bradenton Window. They've been in business here for over 50 years and have a huge room full of old parts and stuff. Their number is 941-747-4695. If they might have it and I can help by checking it out or something, like me know. I need to check for a little strip for the bottom of the jalousie window for my Frolic, anyway.
|
|
|
|
Post by brokevet on Mar 12, 2013 14:14:15 GMT -5
Thanks.
|
|
