|
Post by The Pink Sheep on May 30, 2013 16:30:47 GMT -5
|
|
|
Post by The Pink Sheep on May 30, 2013 16:35:34 GMT -5
|
|
|
Post by schweetcruisers on May 30, 2013 17:12:46 GMT -5
The pipe in picture one looks like a modern sewer dump valve, the pipe in the second picture is a vent pipe for the holding tank.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 30, 2013 19:17:41 GMT -5
Definitely looks to be a holding tank outlet.
|
|
Hamlet
2K Post Member
Posts: 2,241
|
Post by Hamlet on May 30, 2013 20:21:00 GMT -5
Guys, guys, you've got it all wrong... That big one out the bottom is the outlet from the exhaust manifold that's attached to the afterburner. Why do you think Shastas needed wings?
|
|
|
Post by schweetcruisers on May 30, 2013 21:08:53 GMT -5
Hamlet is right about it being the exhaust manifold(literally)!!!
|
|
Hamlet
2K Post Member
Posts: 2,241
|
Post by Hamlet on May 30, 2013 21:12:06 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 30, 2013 22:09:55 GMT -5
If you trace the pipe back you will find the turbocharger and the intercooler. The intake pipe is the one in the second photo...
|
|
Hamlet
2K Post Member
Posts: 2,241
|
Post by Hamlet on May 30, 2013 22:10:37 GMT -5
THis is WAAAY too much fun!
|
|
vikx
3K Post Member
Posts: 3,556
|
Post by vikx on Jun 1, 2013 1:06:19 GMT -5
This is NOT FUNNY. It took me 3 hours to cut the cast iron sewer Tee off my Deluxe with a Dremel... no room to cut and give it a whack, just eeeee eeeee eeeee uuuuu. The Dremel sounded ill when I got done. LOL.
I ended up removing the tank and tee but left the shower drain. Installed a new bayonet fitting via a "Fernco" rubber boot. The Tee was so close to the ground, the trailer wouldn't have made it into a driveway, much less a campground.
|
|
Hamlet
2K Post Member
Posts: 2,241
|
Post by Hamlet on Jun 1, 2013 3:11:01 GMT -5
OK, Hamlet stands chastised. I hope the Dremel is better by tomorrow, who knows what service it will be pressed into next! (Something easy, we hope!)
|
|
|
Post by The Pink Sheep on Jun 1, 2013 10:33:02 GMT -5
So...are y'all implying this is a hack job?
|
|
Hamlet
2K Post Member
Posts: 2,241
|
Post by Hamlet on Jun 1, 2013 11:15:36 GMT -5
Nah, just a little "potti" humor.
|
|
|
Post by schweetcruisers on Jun 1, 2013 14:38:14 GMT -5
Nah, just a little "potti" humor. Hamlet sometimes has a "potti" mouth!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 1, 2013 14:58:39 GMT -5
Yeah, but he is still a lot of fun to have around!
|
|
Hamlet
2K Post Member
Posts: 2,241
|
Post by Hamlet on Jun 1, 2013 16:24:26 GMT -5
thankkyouverymuch!
|
|
vikx
3K Post Member
Posts: 3,556
|
Post by vikx on Jun 3, 2013 1:31:24 GMT -5
Pink Sheep, we do get a little boisterous around here. . This Deluxe sewer outlet was original but very low to the ground. I was reminiscing on the Dremel fiasco. It still tries to work, by the way... Poor thing.
PS: Forgot to add: I bought Partner a new one for X'mas! Snicker.
|
|