|
|
Post by lajaime on May 10, 2011 23:10:40 GMT -5
I am really struggling to find a replacement for this front corner piece. Any suggestions? I will try to do a few more threads with additional pictures in order to elaborate. HELP!  |
|
|
|
Post by lajaime on May 10, 2011 23:17:50 GMT -5
Front view Attachments:
|
|
|
|
Post by lajaime on May 10, 2011 23:19:45 GMT -5
Actual piece that I am looking for, but for front left corner of trailer Attachments:
|
|
|
|
Post by lajaime on May 10, 2011 23:21:57 GMT -5
Here's what it looks like on the back left corner attached. Attachments:
|
|
|
|
Post by lajaime on May 10, 2011 23:29:01 GMT -5
|
|
jessie
100 Post Member
Abbey, our 1969 Compact
Posts: 130
|
Post by jessie on May 11, 2011 0:27:02 GMT -5
Hmmm... I don't know what that is. My drip rail extends all the way to the bottom. You can probably do that, too... just get more drip rail and take it all the way down.
|
|
vikx
3K Post Member
Posts: 3,556
|
Post by vikx on May 11, 2011 1:06:03 GMT -5
I tend to agree with Jessie. It's normal drip rail/edge trim. Just add a piece.
|
|
|
|
Post by lajaime on May 15, 2011 23:08:31 GMT -5
No...it's not drip railing. I don't know if you were able to look at the flikr link but those pictures are bigger. This is a 1956 trailer and the later models do indeed have drip railing that goes all the way down the seams but not this one. I am hoping someone with a similar model will see this and point me in the right direction!
|
|
jessie
100 Post Member
Abbey, our 1969 Compact
Posts: 130
|
Post by jessie on May 16, 2011 14:32:30 GMT -5
why not just get more drip rail and extend it? (of course i am far from a purist... lol)
|
|
Gone Kayaking
1K Post Member
long live the Vintage Shasta Trailer Forum....we're gone but you are not forgotten!
Posts: 1,600 
|
Post by Gone Kayaking on May 16, 2011 17:39:29 GMT -5
Hi,
I had some kind of odd corner flashing on my 1956 1500, that was definitely NOT original, and was responsible for much leakage into my trailer. This was added on in a repair done by a po who clearly didn't have access to the kind of knowledge base offered through this forum. I am replacing with the drip rail along with overlapping the edges as is shown throughout this forum. If you look at my photostream (see links below) you will see the offending culprit.
|
|
Gone Kayaking
1K Post Member
long live the Vintage Shasta Trailer Forum....we're gone but you are not forgotten!
Posts: 1,600
|
Post by Gone Kayaking on May 16, 2011 17:42:05 GMT -5
I'm just using the standard 13/16" drip rail/j rail that you can find at interstate metals and many trailer supply house.
|
|
Gone Kayaking
1K Post Member
long live the Vintage Shasta Trailer Forum....we're gone but you are not forgotten!
Posts: 1,600
|
Post by Gone Kayaking on May 17, 2011 22:59:15 GMT -5
|
|
